Pulp, Paper and Wood Mill

Pulp, Paper and Wood Mill

Contact Us

Pulp, Paper and Wood Mill Industry

Have you been looking for heavy-duty industrial grade finned coils, for either an exact dimensional replacement or a new application? Are you searching for a coil, which does not plug up and can handle the abuse of a hot water or steam wash down?
For years the Paper Mill Industry has been plagued with the plugging of coils due to the large quantities of particulate in the air stream and the intense humidity involved. A number of attempts have been made to supply coils that will be reasonably efficient and yet not plug - but all to no avail. Conventional coils, with their spiral wrapped paper thin fins, do not stand up to a high pressure hose while being washed down in an attempt to clean them, and the fins collapse, leaving the coil ruined.
Anderson - Snow Corporation offers a coil that solves this problem! ANSCOR has developed a coil fabricated from 1" O.D. tubing and flat plate fins. Fin spacings are available from 2.5 to 11 fins per inch. Coils being furnished with 2.5 to 6 fins per inch will have a fin thickness of.025", and coils furnished with 7 to 11 fins per inch will have a fin thickness of .016". This heavy fin is available in Copper, Aluminum, Type 304 or Type 316 Stainless Steel, Monel, Carbon Steel and Cupro-Nickel, The heavy wall 1" O.D. tubing used in conjunction with this fin is also available in the above materials. This heavy fin can take more abuse without the fins collapsing. The wide fin spacing also makes plugging less likely to occur. The coil is available in 1 or 2 rows, either standard steam or steam distributing (tube within a tube type) coils.
Share by: